"Guidebook" Sticker Overlay for Yamaha Seqtrak

Product Description:
This product is a custom designed and manufactured 28-piece adhesive-backed label kit for the Yamaha Seqtrak.  It is intended to be a handy cheat-sheet reference with most of the Seqtrak's control combinations and shortcut functions readily available.
 
Here are the primary features of the overlay design:
Main synth and sequencer sections are color-coded (drum tracks in orange, synth and DX tracks in blue, sampler track in green, synth keys in purple)
"All" knob is indicated with a magenta color.  Pressing the "All" knob acts like a shift button, so the "All" knob related control combinations are indicated in magenta text next to corresponding controls
'Cheatsheet' control combinations are shown for most sequencer and sound design functions
Sample recording instructions and options in green text
MIDI channel numbers shown next to corresponding track knob
Signal-flow diagram showing how individual track audio output s are routed through the FX, etc.
Default scale and root note guides
Sound design functions listed next to corresponding controls
Sequencer keys labeled with sound categories, step number, and musical note for keyboard mode
Power-on control combinations (factory reset, format USB drive, etc.)
 
The artwork is printed using a high-quality commercial printing process to provide the best resolution and color saturation. A glossy topcoat lamination is then applied in order to improve contrast and provide physical protection for the printed image.  Holes are cut for all of the front panel buttons, dials, and LEDs. When properly installed the overlay will not interfere with any of the synthesizer’s functions (see installation instructions below for details).
 
Installation:
If your synthesizer is very dirty, you may want to clean it with a soft cloth before installing the overlay. You may also want to wash your hands with soap and water before installing the overlay to prevent getting oils or debris on the adhesive.
 
To install the overlay, first remove all of the Seqtrak's front panel knobs.  Next, peel off the overlay’s backing, and place the overlay onto your synthesizer.  See product photos for the intended label locations.  If you are not happy with the sticker alignment, you can remove the overlay and reposition it as necessary.  We recomend using tweezers to help align the labels for the individual sequencer buttons.  Once all of the stickers have been applied, re-install the knobs.
 
Note that this particular label will very likely leave adhesive residue on your Seqtrak if you ever decide to remove it after it has been in place for more than a few minutes.  This residue may be difficult to remove.  Mineral spirits products such as 'gamsol' can be very helpful in removing adhesive residue, however we cannot guarantee that the original front panel labeling will not be affected.  In our testing, we were able to remove the adhesive residue with fingernails or by gently rubbing with bare hands, but your results may vary.
 
Manufacturing Info: 
Our products are manufactured in small batches based on customer demand.  This product is made in the USA and ships from Portland, Oregon, USA.
 
This is an aftermarket product. The product includes the adhesive overlay kit only and does not include a Yamaha Seqtrak. Oversynth is in no way affiliated with Yamaha Corporation.